12
2021
-
05
Principle of operation of the concentration equipment
Author:
Extraction and concentration, as the name suggests, refers to extracting essential raw materials from certain containers, etc. The equipment involved in extraction and concentration is extensive. Extraction and concentration equipment is advantageous as it combines extraction and concentration into a single unit for efficient extraction and concentration of active ingredients.
Working principle: The material is put into the extraction tank and 5-10 times the solvent (such as pure water, ethanol, etc., depending on the requirements of the extraction process) is added. First, open the extraction steam valve and steam for about 1 hour. Then, open the vacuum equipment to draw the liquid into the heater evaporator. Open the secondary steam valve of the heater to heat and evaporate. This continuous cycle is repeated for 3-4 hours, then the extraction equipment and heater's secondary steam valve are closed, and the secondary steam valve of the second heater is opened to collect the paste. The experimental spray dryer has an automatic stainless steel needle for unclogging within the spray gun, and its working frequency is adjustable. When the nozzle is clogged, this needle automatically clears the blockage to ensure the continuous and normal progress of the experiment.
This type of extraction and concentration equipment uses a fully enclosed continuous cycle extraction and concentration method. During the thermal extraction process, steam generated during boiling is condensed for simultaneous reflux and recovery. When the condensate refluxes, it flows into the deeper layers of the material, leading to full contact between the material and liquid, thus creating a dynamic extraction effect. Simultaneously, this reduces the amount of solvent used and the extraction time, increasing production efficiency and product yield. The solution within the small extraction and concentration equipment continuously enters the bottom of the circulating heater through a filter for gradual concentration. The entire spray drying experimental process is visible, facilitating control of the experimental process and timely detection and adjustment of any problems.
Related News