11
2021
-
11
Working principle and application range of multi-effect evaporators
Author:
Concentrators are mainly suitable for the concentration production processes in the industries of traditional Chinese medicine, health products, natural seasonings, food additives, food, and chemicals. They can provide different concentrations of extracts for different drying production methods, featuring wide applicability, simple operation, and low maintenance rate.
In single-effect, single-unit production, the advantages of short production time, high speed, and simple operation are utilized. By efficiently using energy (single-effect is optimal when the extract temperature is around 90°C and the vacuum degree is -0.08 MPa, resulting in a boiling point of 60°C), the advantages of single-effect can alleviate urgent production needs. Utilizing the large surface area of the condenser, single-unit production can be carried out using single-effect or combined methods. When two units operate simultaneously, it is single-effect production. If solvent recovery is needed, it can be operated through the plate buffer tank in the vacuum protection system.
Multi-effect concentration is similar to the concept of multi-effect evaporation; it essentially uses the principle of evaporation to concentrate the solution. The operating principles of multi-effect evaporation and multi-effect concentration are basically the same.
Multi-effect concentration is a series evaporation operation where the secondary steam from the previous effect is used as the heating steam for the next effect. In multi-effect concentration, each evaporator is called an effect. The evaporator that introduces fresh heating steam is called the first effect; the evaporator using the secondary steam from the first effect as the heat source is called the second effect, and so on.
In double-effect production, the secondary steam from the first effect (vacuum degree 0.04 MPa, liquid temperature over 80°C) supplies heat for the second-effect concentration (vacuum degree 0.08 MPa, liquid temperature over 60°C). When producing high-concentration extracts, the first effect produces an extract with a concentration of around 1.2, which is then transferred to the second effect for combined concentration, reaching a concentration of about 1.4 before discharge. This process effectively achieves energy saving.
Related News