20

2022

-

06

Factors Affecting the Effectiveness of Concentrated Equipment

Author:


  Extraction and concentration equipment is suitable for the extraction, concentration, paste making, percolation, volatile oil extraction, and alcohol recovery of heat-sensitive materials such as plants, animals, traditional Chinese medicine, and food additives. It can meet the needs of higher education institutions, research institutions, and hospitals for new drug extraction, determination of new process technology parameters, intermediate experiments, new product development, extraction of precious medicinal materials, and concentration of medicinal liquids. However, during operation, it is necessary to pay attention to some factors that significantly affect the equipment's performance, thereby reducing equipment and material losses. Let's learn about the factors affecting the effectiveness of extraction and concentration equipment!
  
  1. Temperature
  
  The temperature of the reflux liquid should be controlled and not be too low. At the same time, the temperature in the extraction tank should be controlled and kept constant as much as possible. Cold extraction has less impurities and better clarity, while hot extraction has high efficiency but poor clarity. The purpose of boiling is to enhance the diffusion and penetration of the solution. Although boiling can reduce the concentration difference of the solution in a short time, it will dissolve many large molecular impurities.
  
  2. Input Amount
  
  The principle of thermal reflux extraction dictates that the input amount should be larger than that of a multifunctional extraction tank.
  
  3. Reflux Time
  
  If the reflux time is too early, the low concentration of the extract will prolong the effective extraction time. If the reflux time is too late, the saturated extract concentration is not conducive to the extraction of effective components and wastes energy. After extraction (boiling) for 1 hour, part of the medicinal liquid should be placed in the concentration tank, and refluxing should begin and be timed. Note that air in the tank should be removed when boiling in the extraction tank; otherwise, the tank will pressurize.
  
  It is believed that through the editor's introduction, everyone has a better understanding of the use skills of extraction and concentration equipment. It is hoped that the above factors will be noted during use to maximize the effectiveness of the equipment.