22

2022

-

06

Pre-startup checks for the concentration equipment

Author:


  Extraction and concentration is a combined unit for extraction and concentration, suitable for the extraction, concentration,膏 making, percolation, volatile oil extraction, and alcohol recovery of heat-sensitive materials such as plants, animals, traditional Chinese medicines, and food additives. It meets the needs of higher education institutions, research institutions, and hospitals for new drug extraction, determination of new process parameters, intermediate testing, new product development, extraction of valuable medicinal materials, and concentration of medicinal liquids. So, what checks are needed before starting the extraction and concentration equipment?
  
  1. Pre-start-up preparation: Check if all seals and valves of the equipment are intact and leak-free, if the vacuum pump rotates smoothly and is intact, if the electrical appliances and voltage in the control box are normal, if the boiler water is full, and if the cooling circulating water is normal.
  
  2. Equipment selection should be based on mainstream products and production processes, and the equipment should be used correctly according to its performance and working principle. As can be seen from the process flow, the drug quality and production cost are basically determined in the pretreatment stage. If the production process and equipment performance cannot be well combined, problems such as unstable product quality, high raw material consumption, and high production cost will occur during production. After pretreatment and extraction, the medicinal materials become intermediate products of drugs, becoming drugs.
  
  3. Before starting the vacuum pump, open the water inlet valve first. Dry running without water is strictly prohibited. Open the vacuum valve of the extraction tank and maintain the vacuum degree in the extraction tank at -0.03 MPa to -0.04 MPa to increase the boiling point and material dynamics in the tank. If a vacuum pump screaming sound appears, slightly adjust the air leak valve on the vacuum pump head counterclockwise. After extraction, turn off the hot water pump and circulation pump power, and open the vent.
  
  The above are the checks needed before starting the extraction and concentration equipment. Do you understand? Hope this helps you in use!