14

2022

-

10

Pre-startup checks for the concentration equipment

Author:


Extraction and concentration is a combined unit for extraction and concentration, suitable for the extraction, concentration, paste making, percolation, volatile oil extraction, and alcohol recovery of heat-sensitive materials such as plants, animals, traditional Chinese medicine, and food additives. It meets the needs of higher education institutions, research institutions, and hospitals for new drug extraction, determination of new process technology parameters, intermediate experiments, new product development, extraction of valuable medicinal materials, and concentration of medicinal liquids. So, what checks are needed before starting up the extraction and concentration equipment?
  1. Pre-start-up preparation: Check if all seals and valves on the equipment are intact and leak-free, if the vacuum pump rotates flexibly and is intact, if the electrical appliances and voltage in the control box are normal, if the boiler water is full, and if the cooling circulating water is normal.
  2. Equipment selection should be based on mainstream products and production processes, and the equipment should be used correctly according to its performance and working principle. As can be seen from the process flow, the quality and production cost of the medicine are basically determined in the pre-treatment stage. If the production process and equipment performance cannot be well combined, problems such as unstable product quality, high raw material consumption, and high production costs will occur during production. After processing through the pre-treatment and extraction processes, the medicinal materials become intermediates of the medicine, becoming medicine.
  3. Before starting the vacuum pump, the water inlet valve must be opened first. Dry running without water is strictly prohibited. Open the vacuum valve of the extraction tank and maintain the vacuum degree in the extraction tank at -0.03 MPa to -0.04 MPa to increase the boiling point and material dynamics in the tank. If a screaming sound from the vacuum pump occurs, the vent valve on the vacuum pump head can be slightly adjusted counterclockwise. After extraction, turn off the power of the hot water pump and circulation pump and open the vent.
  The above are the checks needed before starting the extraction and concentration equipment. Do you understand? Hope this helps you during use!