15
2024
-
01
Filter content and precautions
The flow channels inside the new filter are professionally designed and processed, with a 40% increase in flow area compared to older filters. This can reduce problems such as poor indoor heating efficiency caused by large building areas and excessive filter water resistance.
●The filter is used to implement common functions, reduce code redundancy, and improve maintainability
●A filter can be configured for use by multiple resources
●A resource can also be configured with multiple filters, which are called in the order of configuration
When replacing the filter, you must pay attention to the installation direction: When replacing the filter, you should pay special attention to the installation direction of the filter. The installation direction of the filter should be consistent with the original one, otherwise it may lead to reduced filtering effect or abnormal use.
Therefore, during equipment production and operation, equipment production and operation technicians should continuously strengthen the use of filters, regularly check, clean, and replace various filters to ensure the effectiveness of the filters.
After a period of time, certain impurities will accumulate in the filter core, at which point the pressure will increase and the flow rate will decrease. The impurities inside the filter core need to be removed in time;
The fundamental solution is to block dust in the pre-filter. Replacing the pre-filter generally does not require shutdown or debugging, so experienced owners will focus their attention and money on the pre-filter. For 10000-level and 100000-level clean rooms. The pre-filter can be F8 filter, so the service life of the terminal filter can generally reach five years. In foreign projects and domestic new projects, F8 filter is a common pre-filter for non-uniform flow clean rooms.
Therefore, equipment production and operation technicians should continuously strengthen the importance of filter usage during equipment production and operation, and also regularly check, clean, and replace various filters in time during equipment production and use to ensure the effectiveness of filter use.
(4) Selection of filters; Coarse filters use plate filters with large dust holding capacity, imported fiberglass filter material, which are sturdy and durable, and have two models to choose from: washable and replaceable. The interception efficiency can reach more than 75%. Medium efficiency filters use low-resistance filters, and the filter material is ultra-fine polypropylene fiber filter material, which will not produce secondary pollution, and plays a good protective role for the terminal filter. The filter frame structure is reasonable, and it is firmly welded to the inner wall of the box, strictly sealed without leakage, and the filter is easy to load and unload.
The technical index of the air filter can be expressed by the following formula: PF=-980log(1-η/△P). In the formula, η is the efficiency of the filter, and △P is the pressure difference of the filter. In fact, the ratio of efficiency and pressure difference can basically clearly represent the technical and economic index of the filter. When users choose air filters, they only need to compare the efficiency and pressure difference of the filter products to determine the technical level of the products. However, these two indicators can only characterize the initial operating state of the filter. The service life and operating conditions of the filter are closely related to the mechanism and dust holding capacity. In areas with poor air quality, or where the air system pre-treatment is poor, the service life of the air filter will be seriously affected. The purpose of air purification is to purify polluted air to the state required for production and life, or to achieve a certain level of cleanliness.
Related News