04
2024
-
03
How much do you know about the vacuum pressure concentrator series?
Concentrating the extraction solvent is a necessary step in pesticide residue detection. Currently, there are two main concentration methods: rotary evaporation (reduced pressure) and nitrogen blowing concentration (as well as K-D concentration, etc.). These two methods each have their own applicability.
In the low-temperature evaporation crystallization system, the vacuum degree in the vacuum evaporation tank increases under the action of the vacuum system. Wastewater is sucked into the equipment via the raw water inlet valve, assisted by the vacuum in the evaporator. When the wastewater reaches the mid-level in the evaporation tank, liquid inflow stops. After the vacuum degree reaches the set value, external steam is used for heating. The low-boiling point components are evaporated. The high-boiling point components of the wastewater remain in the evaporation tank as a concentrate. The concentrate is automatically discharged from the equipment. The steam enters the condenser along the pipeline, becomes liquid through exchange with the external condensation system, and the distilled water is discharged along the outlet pipe.
Reduced pressure concentration - By drawing a vacuum, negative pressure is created in the container. This lowers the boiling point of the substance without changing its chemical properties, allowing solvents that are chemically unstable or have high boiling points at high temperatures to be converted from liquid to gas at low temperatures and removed by pumping or collected again via a condenser.
Under vacuum and high temperature conditions, the material evaporates, concentrates, and vaporizes. The resulting secondary high-temperature steam is used to continuously concentrate the material until the material concentration increases, becoming viscous and crystalline. After drying and discharging from the equipment, energy saving and profit generation are achieved.
A vacuum pressure reducing valve is a very important piece of industrial equipment that helps factories, workshops, and laboratories better control pressure, ensuring smooth production and experiments. Let's learn about the functions and advantages of vacuum pressure reducing valves. The air source heat pump type waste liquid low-temperature reduction equipment uses the principle of air energy and is a high-vacuum, ultra-low-temperature reduction equipment. Maintaining a vacuum, the evaporation temperature remains around 37℃. It evaporates and concentrates industrial wastewater. Through online concentration treatment of wastewater, it achieves the recovery and reuse of reclaimed water or discharge after meeting the detection standards. This greatly reduces the total amount of wastewater discharge, significantly reduces the cost of enterprise discharge, saves freshwater resources, and improves the current global ecological environment.
For directed synthesis methods, target impurities with higher content are often obtained. In this case, extraction or crystallization methods are usually used. After removing the solvent under reduced pressure or filtering, washing and drying, the target impurity reference standard can be obtained. It should be noted that impurity reference standards are often unstable. They should be prepared and dried quickly at low temperatures and stored in a low-temperature refrigerator. Impurities separated by column chromatography or preparative thin-layer chromatography are usually also concentrated to dryness under reduced pressure at low temperatures and stored in a low-temperature refrigerator. For crude impurities with lower content, the preparation liquid obtained by preparative liquid chromatography. For weakly polar substances, acetonitrile can be removed under reduced pressure first, and then extracted and concentrated to dryness; for strongly water-soluble substances, a salt-free aqueous-organic phase can be used to prepare again to remove buffer salts, and low-temperature rotary removal of water or freeze-drying can be used to remove water, so as to obtain the target impurity.
Related News